Plasma Cutter: Difference between revisions
From Elwiki
Darkboy132 (talk | contribs) |
No edit summary |
||
| Line 71: | Line 71: | ||
* Can usually regain its own Awakening Bead if used in Awakening Mode. | * Can usually regain its own Awakening Bead if used in Awakening Mode. | ||
* In Awakening Mode, the two bottom lasers will still fire during the fatigue state. This is due to the appearance delay of the lasers. | * In Awakening Mode, the two bottom lasers will still fire during the fatigue state. This is due to the appearance delay of the lasers. | ||
* Despite the incredible range, the range of Plasma Cutter does not have infinite range. | |||
{{DMSkills}} | {{DMSkills}} | ||
Revision as of 21:19, 6 September 2011
| File:AishaS31.png |
[Magical] Dark Mage points her finger forward and shoots a very long straight laser that reaches as far as the end of the stage and beyond. After the laser dissipates, Dark Mage goes into a two second fatigue. Awakening adds four more lasers with an extremely wide angle, increasing the amount of hits but lowering the damage. It does not knockdown. | |
Prerequisites
| Class | Master | Prerequisite(s) | Required for | |
| Skill Tree | Skill | |||
| Dark Mage | Lv5 | 65SP |
N/A | N/A |
Skill Information
| Skill Lv | Max Hits | Damage | Max Hits (Awakening) | Awakening Damage | MP Usage |
Cool Down |
| 1 | 19 | Deals 67% damage per hit | 90 (16 per laser) | Deals 36% damage per hit | 300 MP |
|
| 2 | Deals 80% damage per hit | Deals 44% damage per hit | ||||
| 3 | Deals 90% damage per hit | Deals 51% damage per hit | ||||
| 4 | Deals 107% damage per hit | Deals 59% damage per hit | ||||
| 5 (M) | Deals 128% damage per hit | Deals 59% damage per hit | ||||
| 6 | Deals 148% damage per hit | Deals 68% damage per hit | ||||
| 7 |
Tips and Details
- Plasma Cutter has a extremely long horizontal range.
- The laser only goes in a straight line, however, Aisha changes the angle at which it is fired constantly.
- Awakening version is very good for big bosses.
- Can usually regain its own Awakening Bead if used in Awakening Mode.
- In Awakening Mode, the two bottom lasers will still fire during the fatigue state. This is due to the appearance delay of the lasers.
- Despite the incredible range, the range of Plasma Cutter does not have infinite range.
