Plasma Cutter
From Elwiki
| File:AishaS31.png |
[Special Active] Dark Mage points her finger forward and shoots a very long straight laser. After the laser dissipates, Dark Mage goes into a two second fatigue. In Awakening Mode, there are four additional lasers that form an extremely wide angle, increasing the amount of hits but lowering the damage. | |
Prerequisites
| Class | Master | Prerequisite(s) | Required for | |
| Skill Tree | Skill | |||
| Dark Mage | Lv5 | 65SP |
N/A | N/A |
Skill Information
| Skill Lv | Max Hits | Damage | Max Hits (Awakening) | Awakening Damage | MP Usage |
Cool Down |
| 1 | 19 | Deals 67% damage per hit | 90 (16 per laser) | Deals 36% damage per hit | 300 MP |
|
| 2 | Deals 80% damage per hit | Deals 44% damage per hit | ||||
| 3 | Deals 90% damage per hit | Deals 51% damage per hit | ||||
| 4 | Deals 107% damage per hit | Deals 59% damage per hit | ||||
| 5 (M) | Deals 128% damage per hit | Deals 59% damage per hit | ||||
| 6 | Deals 148% damage per hit | Deals 68% damage per hit | ||||
| 7 |
Tips and Details
- Plasma Cutter has an extremely long horizontal range.
- The laser only goes in a straight line, however Aisha changes the angle at which it is fired constantly.
- Awakening version is very good for big bosses.
- Can usually regain an Awakening Bead if used in Awakening Mode.
- In Awakening Mode, the two bottom lasers will still fire during the fatigue state. This is due to the appearance delay of the lasers.
